Advice Any mechanically minded Freddies around?

Access Denied

It was like that when I got here...
Joined
Jun 14, 2006
Messages
2,552
I've got a 2005 1.6 Ford Focus and I've got water in my spark plug wells. I know where it's coming from and it's an easy fix. However I need to replace the plugs and that necessitates clearing out the water and getting rid of the rust that's built up before removing the old ones. Seems to me that it'll be easier to do if I remove the entire rocker cover because I'll have better access to the wells.

Before I do that however, I need to know if I have to replace any gaskets/seals or if I can just put the cover back on when I'm done.

Cheers!
 

Syri

FH is my second home
Joined
Jan 4, 2004
Messages
1,019
I think the rocker cover usually has a rubber seal, so you might not need to replace it. if there's been water building up though, or if it's been a while since it was opened, it might perish and need replacing. If it's one of the cork gaskets on that model, chances are it will need replacing. Best bet is to look on a part supplier, put in your reg and see which type it uses. They're usually pretty cheap though, and if it's not been changed for a while, could be worth putting a new one in anyway, seeing as you're taking the cover off.
 

Job

The Carl Pilkington of Freddyshouse
Joined
Dec 22, 2003
Messages
21,652
Always put a new one on.
It will have been squeezed over time even if its rubber.
At a pinch use gasket sealant as well.
 

Users who are viewing this thread

Top Bottom