Salvage

[Commandment]

What are the best dia items in DF for salvage? best ratio of seals per bar ? ..

tx

 

[UndyingAngel]

afaik its the Long sword which is 15Dia seals and you get 100bar for it. which is 220g approx

 

[chretien]

afaik its the Long sword which is 15Dia seals and you get 100bar for it. which is 220g approx

Correct. Works out at a salvage value of very nearly 15 gold per seal once you've trinketed it. It returns 100 bars of Asterite per sword at 2.24g per bar.

 

[Outlander]

what is the metalworking skill or whatever needed to effectivly salvage and trinket that stuff? it around 800 mark?

 

[stafrin]

yes about 800 is what you need

 

[Asq]

http://www.vertellingen.org/eel/salvage.html

 

[Galoma]

tailor is cheapest to skill up...

to level it make gloves and boots.... when u reach level 800 mae WC or Ac or somthing to power level your metal working (+leather) up to the 800... that can be done very cheaply... then u have a super salvager...

and if u get near alb / excal... come buy my seals in the house

 

[Boni]

what is the metalworking skill or whatever needed to effectivly salvage and trinket that stuff? it around 800 mark?

667 if i remember correctly, some 2/3 factor in the equation gives 666.7 for a lvl 50 material. Though you might need more to trinket the material salvaged, by the time you get to 667 you can at least start ripping those expensive items up.

 

[aaredhawk]

that i salvage

you will buy avernal long swort (from diamon merchant the 1st one) you must ne 600+ to take all material
you will take 100 asterite metal bars from 1 swort

 

[Lothandar]

tailor is cheapest to skill up...

to level it make gloves and boots.... when u reach level 800 mae WC or Ac or somthing to power level your metal working (+leather) up to the 800... that can be done very cheaply... then u have a super salvager...

and if u get near alb / excal... come buy my seals in the house

I think it's better to just buy and trinket metal up to 600 then use the lowlvl crafts to quickly reach 1000 in metalworking.

 

[Mr.Brand]

Fletching is the fastest and cheapest method of increasing metalworking.
Arrows need one or two pieces of metal, so you can grab a ton of tries at
a time, plus an arrow takes next to no time to make.