E
Embattle
Guest
- Thread starter
- #31
O
old.TUG
Guest
- Thread starter
- #32
someone find my 1st post
cuz i cannot
be
arsed
thx
cuz i cannot
be
arsed
thx
X
xenon2000
Guest
- Thread starter
- #33
Originally posted by TUG
someone find my 1st post
cuz i cannot
be
arsed
thx
this it tuggy??
http://forums.barrysworld.com/showthread.php?threadid=2151
S
Summo
Guest
- Thread starter
- #34
Bumlick.
B
bodhi
Guest
- Thread starter
- #35
You still wanting to get rid of duke Nukem 3D?
C
Ch3tan
Guest
- Thread starter
- #36
Look, for thoose actually looking hard for the first thread....
Click on the profile button for the member u are searching for.
On the top right there is a tiny link which reads "search for all posts by this user". Click it, then go to the last page of the results, there at the very bottom id the first post by that user.
Click on the profile button for the member u are searching for.
On the top right there is a tiny link which reads "search for all posts by this user". Click it, then go to the last page of the results, there at the very bottom id the first post by that user.
W
Wij
Guest
- Thread starter
- #37
M
MYstIC G
Guest
- Thread starter
- #38
http://forums.barrysworld.com/showthread.php?s=&postid=68085#post68085
"Ok im gonna stop now cos otherwise this is gonna turn into a huge rant." Guess I've been ranting since AprilOriginally posted by MYstIC G
I'm glad you enjoy the game cos IMHO its ace, so I hope it gives you as much fun as it does me.
Personally i've got nothing against newbies. I do have problems with the following though.
1 - Anybody who asks a question that is covered in the Counter-Strike manual
2 - When people spend every round of a map camping in the exact same place for no good reason, i.e. there not defending a bomb site, guarding hossies, etc
3 - When people refuse to do the map objectives, i.e. dont plant/diffuse the bomb, dont save/defend the hossies or dont escape as VIP
4 - People who spam "Votemap X cos this map sucks"
5 - People who accuse others of cheating soley because their being killed every round.
6 - Team Killers
7 - Bug Exploiters in maps, hossie jumping, etc.
Ok im gonna stop now cos otherwise this is gonna turn into a huge rant.
I genrally try and get on with everybody when I play CS. Besides the more newbies the better cos I gotta get some kills
N
nothing
Guest
- Thread starter
- #39
what about mine? can anybody find mine for me?
I was trying to find my first post in the GameSpy forums a while back, but they don't have such good archives. Probably because the forums were still in alpha when I got there.
I was trying to find my first post in the GameSpy forums a while back, but they don't have such good archives. Probably because the forums were still in alpha when I got there.
M
MYstIC G
Guest
W
Wij
Guest
- Thread starter
- #41
M
MYstIC G
Guest
- Thread starter
- #42
nice try wij, but not fast enough
W
Wij
Guest
- Thread starter
- #43
I'm off for a shite then...
W
Will
Guest
- Thread starter
- #44
My first post
Deaglers
The best way to stop someone with a deagle is to throw an empty gun and them and pull your pistol.
Just watching them desperately reloading brings a tear to my eye.
I actually used to play computer games - weird. At least I got over that.
W
Wij
Guest
- Thread starter
- #45
Most of us came here to talk about games. What a bunch of fags we were
B
bodhi
Guest
- Thread starter
- #46
I came here to take the piss out of Nova SR drivers.
W
Wij
Guest
- Thread starter
- #47
Keep going then. Slacker !
B
bodhi
Guest
- Thread starter
- #48
http://forums.barrysworld.com/showthread.php?postid=15440#post15440
My first post
An incoherent ramble by the looks of it. Must have been drunk
My first post
An incoherent ramble by the looks of it. Must have been drunk
X
xenon2000
Guest
- Thread starter
- #49
Originally posted by Bodhi
http://forums.barrysworld.com/showthread.php?postid=15440#post15440
My first post
An incoherent ramble by the looks of it. Must have been drunk
Your first post involved insulting frankie, taking the piss out of TUG's car, exposing RL information about the aforementioned, and making references to 14yr old girls.... again with TUG in target....
I dont believe you. (Does this thing actually work?)
S
Sir Frizz
Guest
- Thread starter
- #50
i read about half of that thread on Bodhi's first post and it scared me
B
bodhi
Guest
- Thread starter
- #51
/me looks all innocent.
Me? Nah.
E
Embattle
Guest
- Thread starter
- #52
Originally posted by Bodhi
An incoherent ramble by the looks of it. Must have been drunk
Your normal state then
O
old.TUG
Guest
- Thread starter
- #53
Originally posted by Bodhi
I came here to take the piss out of Nova SR drivers.
gah, funny how we get along now
and cheers xenon for findin me 1st postage
PS nova's ownz0r
O
old.TUG
Guest
- Thread starter
- #54
lol i fink me 1st eva post woz as follows actualleh
Well... firstly, graZe u r a tit and havent a clue what you are on about. Are u stoned m8??? C366 Slot 1's dont do 550 easily, PPGA after week 20 of this year do...
Secondly - to answer DrUgS' question:
get a guaranteed C366@550. A PIII 450 will not do 600 easily without extreme cooling... 581 is possible but why pay loads more when its only a tiny bit faster than celeron 366@550? (also, u may get the celeron to 567MHz enabling turbo in BH6 CPU setup)
As bigt mentioned, goto www.overclockers.co.uk or www.ukgamers.com
I have a webby with an article concerning PPGA C366@550 CPU's - go here
http://www.pcinfo.freeserve.co.uk/ppga366.htm
This is ripped from me article :
Now, you need to understand how certain FSB speeds affect AGP and PCI bus speeds. The standard PCI bus speed is 33MHz. The standard AGP bus speed is 66MHz. These speeds are calculated from FSB speeds. This is how they are calculated in general on most Intel BX chipset motherboards:
For 66MHz-83MHz FSB,
PCI speed = FSB/2 (e.g. 66/2 = 33MHz but 83/2 = 41.5MHz)
For 100MHz-133MHz (but not including 133MHz) FSB's,
PCI speed = FSB/3 (eg 100/3 = 33, 112/3 = 37.333)
For 133MHz+ FSB's, PCI speed = FSB/4
PCI dependant devices like EIDE hard drives and any PCI cards don't always respond well to an increased PCI bus speed - a high PCI speed may cause lock-up's and even damage components due to the extra stress and extra heat being created from the increased speed. All in all, a PCI speed of 37.333 from a 75MHz FSB or 112MHz FSB should be OK. A 41.5MHz PCI speed from 83MHz FSB or 124MHz FSB *may* cause serious problems (could damage both hard drives and PCI cards, cause data loss etc). Some components are OK at this PCI speed but I dont recommend using an FSB which creates a 41MHz+ PCI speed.
In the concern of the AGP bus:
For under 100MHz FSB speeds, the AGP bus can be set to 1/1 of FSB or 2/3rds of the FSB - e.g. 1/1*66MHz FSB = 66MHz AGP speed (the standard speed) but 1/1*83MHz FSB = 83MHz AGP speed - often too high for most AGP cards. So, it may be that you have to set 2/3*83MHz FSB to give a stable AGP speed (that will be lower than the standard 66MHz) equal to 55 1/3MHz.
For over 100MHz FSB's, the AGP speed needs to be set to 2/3rds of the FSB.
I'm sure you can all do the maths to work out AGP speeds when using various FSB speeds. (e.g. 2/3*112 FSB = 75MHz AGP speed which *may* cause problems with older AGP cards but most modern cards are fine at that region of AGP speed).
Hope this helps!
TUG
forever the smartarse
Well... firstly, graZe u r a tit and havent a clue what you are on about. Are u stoned m8??? C366 Slot 1's dont do 550 easily, PPGA after week 20 of this year do...
Secondly - to answer DrUgS' question:
get a guaranteed C366@550. A PIII 450 will not do 600 easily without extreme cooling... 581 is possible but why pay loads more when its only a tiny bit faster than celeron 366@550? (also, u may get the celeron to 567MHz enabling turbo in BH6 CPU setup)
As bigt mentioned, goto www.overclockers.co.uk or www.ukgamers.com
I have a webby with an article concerning PPGA C366@550 CPU's - go here
http://www.pcinfo.freeserve.co.uk/ppga366.htm
This is ripped from me article :
Now, you need to understand how certain FSB speeds affect AGP and PCI bus speeds. The standard PCI bus speed is 33MHz. The standard AGP bus speed is 66MHz. These speeds are calculated from FSB speeds. This is how they are calculated in general on most Intel BX chipset motherboards:
For 66MHz-83MHz FSB,
PCI speed = FSB/2 (e.g. 66/2 = 33MHz but 83/2 = 41.5MHz)
For 100MHz-133MHz (but not including 133MHz) FSB's,
PCI speed = FSB/3 (eg 100/3 = 33, 112/3 = 37.333)
For 133MHz+ FSB's, PCI speed = FSB/4
PCI dependant devices like EIDE hard drives and any PCI cards don't always respond well to an increased PCI bus speed - a high PCI speed may cause lock-up's and even damage components due to the extra stress and extra heat being created from the increased speed. All in all, a PCI speed of 37.333 from a 75MHz FSB or 112MHz FSB should be OK. A 41.5MHz PCI speed from 83MHz FSB or 124MHz FSB *may* cause serious problems (could damage both hard drives and PCI cards, cause data loss etc). Some components are OK at this PCI speed but I dont recommend using an FSB which creates a 41MHz+ PCI speed.
In the concern of the AGP bus:
For under 100MHz FSB speeds, the AGP bus can be set to 1/1 of FSB or 2/3rds of the FSB - e.g. 1/1*66MHz FSB = 66MHz AGP speed (the standard speed) but 1/1*83MHz FSB = 83MHz AGP speed - often too high for most AGP cards. So, it may be that you have to set 2/3*83MHz FSB to give a stable AGP speed (that will be lower than the standard 66MHz) equal to 55 1/3MHz.
For over 100MHz FSB's, the AGP speed needs to be set to 2/3rds of the FSB.
I'm sure you can all do the maths to work out AGP speeds when using various FSB speeds. (e.g. 2/3*112 FSB = 75MHz AGP speed which *may* cause problems with older AGP cards but most modern cards are fine at that region of AGP speed).
Hope this helps!
TUG
forever the smartarse
O
old.frankie
Guest
- Thread starter
- #55
ya
fucking geeks
bout nova SR drivers, im from nova to BMW
not bad
Aiiii
fucking geeks
bout nova SR drivers, im from nova to BMW
not bad
Aiiii
O
old.frankie
Guest
- Thread starter
- #56
lol, just looked at that thread before mentioned...
ya had ya cinq even back then bod? (didnt look at date)
sure cinq is fast, but not faster than SR ffs
lol
ya had ya cinq even back then bod? (didnt look at date)
sure cinq is fast, but not faster than SR ffs
lol
O
old.frankie
Guest
- Thread starter
- #57
prolly goes round corners better though....
/me looks at m8s nova sr
doubt cinqs have as much rust / filler / faded bumpers / manky interior as older novas do
do quite like em little cinqs really
/me looks at m8s nova sr
doubt cinqs have as much rust / filler / faded bumpers / manky interior as older novas do
do quite like em little cinqs really
B
bodhi
Guest
- Thread starter
- #58
Man cinq's rock. Well fast for what they are.
And they are faster than Nova SR's. I proved this
This is not flame bait. I is just quite mashed atm!
And they are faster than Nova SR's. I proved this
This is not flame bait. I is just quite mashed atm!
O
old.TUG
Guest
- Thread starter
- #59
Phear my new 1.0 "Spin" special edition Nova!!
B
bodhi
Guest
- Thread starter
- #60
It's a Nova. Sorry to break this to you, but its still a Nova.