Embattle
FH is my second home
- Joined
- Dec 22, 2003
- Messages
- 13,472
- Thread starter
- #61
In essence repeatedly high daily amounts and Powerwall was at around 60% capacity on the morning of the 23rd which was also a day when home consumption dropped to 13.3 kWh thus at noon it started sending it to the grid until about 19:00. I sort of fixed it the next day by turning the gas boiler off and immersion heater on, which chewed through the electricity rather well.
SunGift Energy was the company we used and the first they did was send around someone to do a survey before anything, they have software which takes into account any shading which in our case on the East side showed a small shading of 0.2% on one panel and 0.5% on another due to a forward roof and where the sun starts on the longer days. We've got no trees near the house to have any effect on the panels, so no shading from that which is good.
The dual sided panels are certainly interesting but they seem better suited to ground application, in essence the ones on a roof will have no gaps better them thus I would suspect little in terms of reflected sunlight reaching the underside.
Well we all would like some with that kind of efficiency but in reality the highest in a lab that has been achieved seems to be about 47% thus don't hold you breath for getting some for your roof anytime soon, maximum on the market seems to be just over 22% but the next step is probably going to be Perovskites which might eventually allow up to 30%.
SunGift Energy was the company we used and the first they did was send around someone to do a survey before anything, they have software which takes into account any shading which in our case on the East side showed a small shading of 0.2% on one panel and 0.5% on another due to a forward roof and where the sun starts on the longer days. We've got no trees near the house to have any effect on the panels, so no shading from that which is good.
The dual sided panels are certainly interesting but they seem better suited to ground application, in essence the ones on a roof will have no gaps better them thus I would suspect little in terms of reflected sunlight reaching the underside.
Well we all would like some with that kind of efficiency but in reality the highest in a lab that has been achieved seems to be about 47% thus don't hold you breath for getting some for your roof anytime soon, maximum on the market seems to be just over 22% but the next step is probably going to be Perovskites which might eventually allow up to 30%.