1 gig probs

[old.addario]

i recently baught a Athlon 1 gig and a gigabyte amd k7 series motherboard, i also have a voodoo 3 2000.

i had to set my clock speed to 100 (750mhz) cause when i set it to 133 (1gig) i get no signal from my grahpics card.

all the drivers are installed properly, so if any1 could help it would be great

 

[luap]

You really must have CAS 2 Ram to run an Ath at 133mhz.

 

[old.addario]

whats CAS 2 ram?

 

[Moving Target]

somethin you dont have?

 

[old.Crunchy]

Check that the AGP/PCI bus are running at the right speed, if you change the bus to 133 without changing the AGP divider (or whatever it's called) you'll be effectively overclocking your card which it might not like.

 

[luap]

CAS 2 is basicly ram that can run at higher speeds with less errors. CAS 3 is slower than CAS 2. CAS 3 is also a lot cheaper